This forum is now closed and archived but the many helpful kiln-related topics are still available to view.
Please feel free to read through the archive or visit www.wagnermeters.com
for more detail about our wide array of moisture measurement solutions.

Author Topic: Southern Yellow Pine and Orange Mold Growth  (Read 8178 times)

Offline jeffgoldinersc

  • Newbie
  • *
  • Posts: 2
    • View Profile
Southern Yellow Pine and Orange Mold Growth
« on: March 13, 2015, 06:07:57 AM »
Hello, I am curious as to whether anyone has seen or experienced an orange type mold growing on Southern Yellow Pine?  It is very aggressive and seems to locate the moist portion of a piece of wood, but it will spread to areas with 15% or less mc.  I realize this is contrary to all literature but we experienced this last year and it has started again this season.  Thank you for any and all responses. 

Offline MichaelM

  • Forum Expert
  • Kiln Drying Enthusiest
  • *****
  • Posts: 98
    • View Profile
Re: Southern Yellow Pine and Orange Mold Growth
« Reply #1 on: March 14, 2015, 06:50:15 AM »
There is another forum thread with good info, you might look at that.  Mold comes in lots of different colors, depending on what's in your region so the orange color is probably not the issue.  If it is on lumber planed at 15%, then at some point that board was above 15% after planning (for example condensation within a package) or perhaps the board was adjacent to a wet board in the unit and the surface was wet enough for mold to grow.

Offline admin

  • Administrator
  • Kiln Drying Tutor
  • *****
  • Posts: 100
  • Kiln drying enthusiast
    • View Profile
Re: Southern Yellow Pine and Orange Mold Growth
« Reply #2 on: March 16, 2015, 09:20:37 AM »
The additional forum thread discussing this is located here: http://www.kilndrying.org/mold-and-stain-issues/2/mold-in-southern-yellow-pine/564/

Offline jeffgoldinersc

  • Newbie
  • *
  • Posts: 2
    • View Profile
Re: Southern Yellow Pine and Orange Mold Growth
« Reply #3 on: March 19, 2015, 04:47:08 AM »
Thank you for responding.  I agree that the moisture content was above 15% at some point or in the wood in order to begin its growth cycle.  I just know how to prevent the growth or if that is possible without drastically increasing processing costs.  We use 1" thick sticks in our pre-cut stacks and it seems to love the dark spaces between rows where mc is the highest.  Its nasty looking stuff and i do have pics if anyone would be interested in seeing them.

Thanks Again,

Jeff

 


Search


* Forum Experts

MichaelM MichaelM
Forum Expert
TimothyD TimothyD
Forum Expert
PhilM PhilM
Forum Expert
StavrosA StavrosA
Forum Expert

* Subscribe to Newsletter

* Upcoming Events

Sorry! There are no calendar events available at the moment.
\
SimplePortal 2.3.6 © 2008-2014, SimplePortal