News: Kilndrying.org passes 100,000 total viewsFrench Language Discussion


Author Topic: Checking in the live knots in DF export squares.  (Read 873 times)

Offline PaulR

  • Newbie
  • *
  • Posts: 1
    • View Profile
Checking in the live knots in DF export squares.
« on: March 06, 2013, 02:16:25 PM »
I was wondering if anybody would have some insight on checking of the live knots in DF export squares.  The sizes being dried are 90x90, 105x105 and 120x120 (mm of course).  The problem with this is that when this lumber is run on the planer, the knots can be chipped, or torn out of the board causing it to be down graded.

Linkback: http://www.kilndrying.org/drying-defects/3/checking-in-the-live-knots-in-df-export-squares/515/


Share via facebook Share via furl Share via linkedin Share via reddit Share via twitter
 


Forum experts

MichaelM lmod MichaelM
Michael Milota Ph.D.
Professor
Oregon State University
READ BIO
PhilM lmod PhilM
Phil Mitchell Ph.D.
Forum Expert
North Carolina State University
READ BIO
PierreA lmod PierreA
Pierre Asselin ing.f.
Forum Expert
READ BIO
StavrosA lmod StavrosA
Stavros Avramidis Ph.D.
Professor
University of British Columbia
READ BIO
TimothyD lmod TimothyD
Timothy Duncan MBA
Engineering Manager
Wagner Meters
READ BIO

* Events


* Job Opportunities